• Stores up to 900 recorded readings in 30 files.
• Recorded readings can be recalled and displayed on dot matrix LCD.
• Download recorded readings to computer for report writing.
• Multiple scales to suit different types of floor slabs and screeds.
• Operates on time proven impedance measurement principle.
• Instant readings on clear digital display.

How does it work?

In Moisture measuring mode, the Tramex CRH uses the principle of electrical impedance measurement to give accurate non-destructive moisture readings in concrete and gypsum floor screeds.

From Electrodes with special spring mounted probes on the base of the instrument, a low frequency signal is transmitted into the material being tested to measure the electrical impedance.

This signal is processed as a percentage of moisture reading for concrete slabs and a relative reading for gypsum screed.

(Relative Humidity Probe, Insitu Sleeves for performing ASTM F2170-02 - Optional )

In Hygrometer mode it uses a solid state capacitive sensor Relative Humidity probe to give accurate and fast relative humidity, temperature & dew point temperature readings.

While being easy and uncomplicated to operate, the Tramex CRH has a powerful micro controller, which processes the information received and accurately calculates the moisture content, relative humidity, temperature and dew point. These readings are displayed on the clear digital display.

The high capacity non-volatile memory chip which stores and retains its data. This information can be recalled at any time by scrolling and reading directly from the instruments own display or downloaded to a PC for storage and inclusion on a spread sheet or report.

The Tramex CRH Identifies Problems Associated with Concrete Moisture
 

Excessive moisture in concrete floor slabs and screeds can lead to a host of problems in all types of floor coverings such as:

Adhesive degradation
Delaminating of the floor covering from the slab and within itself
Condensation, blistering
Movement and deterioration of the covering.
Mold growth
 

Most of these problems can be related to the floor covering being installed on a sub floor that is not sufficiently dry. It is therefore important to insure that the floor slab or screed is sufficiently dry enough to accept a covering or coating. Dimension:6"x3"x14" Weight: 0.77lbs
 

Supplied with: Customized CD
Stored Reading: 900 reading in 30 files
Battery: 9 volt (included)
 

One year warranty