Newly Designed - Tramex MRH III Moisture & Humidity Inspection Kit
Easy to Use - Versatile- Reliable Readings - That Are Accurate and Fast!
MRH III Kit incorporates 3 modes of operation:
Digital Non-Destructive meter for measuring moisture content instantly in a wide variety of construction materials. Includes specific gravity adjustment on wood scale from 0.3 to 0.8.
Plug-In Humidity Probe for Relative Humidity, Temperature, Dew Point and Mixing Ratio readings.
Plug-in Heavy Duty Hand & Hammer Probes for accurate moisture readings in wood from 7 to 40% and for probing deep into wall cavities.
Tramex MRH III is the perfect solution for the Water Damage Restoration, IAQ/Mold Remediation, Home/Building Inspection & Pest Control Industries.
MRH III Test Kit Includes:
MRH3 - Digital Multifunctional Moisture & Humidity Meter
RHPB Relative Humidity Probe - Relative Humidity Probe Converts the New MRH III or CMEXII to a Digital Hygrometer
HH14SP200 Hand Held Probe (with 5/8" tapered and 7" insulated pins)
HA21SP52 Hammer Electrode (with 1.5" insulated pins)
AZ8868 IR Surface Thermometer - This hand held, infrared surface thermometer features a laser target pointer to gain instant readings on almost any surface from a distance.
Tramex Case - Heavy Duty Carrying Case with die-cut foam lining.
MRH Non-Destructive Moisture Testing Mode:
The newly designed Tramex MRH III is a high performance multifunction hybrid of the ever popular Moisture Encounter Plus . It operates on the principle of the non-destructive impedance measurement. Parallel co-planar electrodes are mounted on the base which, during operation, transmit a low-frequency signal into the material under test. To carry out moisture tests simply press the MRH III firmly against the surface being tested and take a reading. There is no surface damage and the reading is immediate.
The MRH III has 5 different measurement scales: Wood, Roofing, Masonry, Drywall and Laminate. It reads the percentage of moisture in wood with adjustable specific gravity settings from 0.3 to 0.8. All other building materials are read on a comparable scale.
Wood Moisture Pin Probe - Pin-type Resistance Mode:
Pin Probe Mode is extremely easy to use. The Pin Probe gives accurate reading in 0.1% increment over the entire measurement range. Readings are displayed on the LCD of the MRH III. The Pin Probe offers a practical and accurate way of determining that wood is at the correct moisture level for its intended use, proving to be a vital tool for testing of structural lumber in the drying process, probing deep into the wall cavities, good quality control of wood flooring and other wood applications.
Relative Humidity (RH) Probe - Hygrometer Mode:
When the Tramex RH Probe is plugged into the MRH III, it automatically changes to Hygrometer Mode . RH Probe provides the ideal solution for measurements of ambient Relative Humidity, Temperature and Dew Point conditions within the building structure materials such as concrete flooring, wall, etc. as well as the environmental conditions within the building or structure. Humidity readings are displayed in both percentage Relative Humidity (%RH) and mixing ratio (grains/lb or grams/kg). The solid-state capacitive sensor in the RH probe gives accurate, fast results, allowing testing of concrete slabs to ASTM F 2170 (Insitu Method), ASTM F 2420 (RH hood method), BS 5325 & BS 8203 standards.
Warranty: One year manufacture's warranty against defects in parts & workmanship.
