Categories
Gas Monitor - Safety Siren Pro Series 3 Leak Detector
Zoom image

Gas Monitor - Safety Siren Pro Series 3 Leak Detector

SKU# - HS80501
Ask a question (4)

Gas Monitor - Safety Siren Pro Series 3 Leak Detector

  • $53.95
Qty:  
In stock (11 items available)
Add a different product to compare

Gas Monitor - Safety Siren Pro Series 3 Leak Detector

The Safety Siren Combustible gas detector detects dangerous levels of hydrocarbon gases, specifically natural gas (methane), butane, and propane gas and any other combustible gases.

Safety Siren Combustible Gas Detector Features: 

  • Computerized calibration helps eliminate false alarms
  • Built-in self-diagnostics assures the unit is operating properly
  • Easily plugs into any standard 110-120v AC electrical outlet
  • Samples air continuously
  • Lock tab feature makes the detector tamper proof
  • Advanced surface mount circuitry increases reliability
  • Powerful 85dB Alarm uL 1484
  • Certified 5 year limited manufacturer's warranty

Safety Siren Pro Series 3 Combustible Gas Detector Specifications:

 
Sensor: Alarm trip point set at: < 25% LEL (lower explosive limit)
0.95% by volume Natural gas (methane) in air
0.53% by volume LP-gas (propane) in air
0.48% by volume Butane in air by volume
 
Operating temperature range: 32 to 104° F

Audible Alarm: 5 second beeping rate 85dB at 10 feet

Visual alarm:
RED: (3 second blinking rate).  Continuous red LED during alarm condition
GREEN: Continuous operation when power on

CG sampling rate: Continuously after initial warm-up period (warm up period is approximately 2.5 minutes)

Dimensions: 4.7" x 3.1" x 2.1"
Weight: Approx.12 ounces
Power Source: 110vAC / 60Hz at 6 Watts


Click Here For User's Manual


    • Weight
      1 lbs
    • SKU
      HS80501
  • Dimensions
    4.7 x 3.1 x 2.1 in.
  • Product Weight
    12 oz.
  • Power Source
    110vAC / 60Hz at 6 Watts
  • Sensor: Alarm trip point set at:
    < 25% LEL (lower explosive limit)
  • Operating temperature range
    32 to 104° F (0 to 40° C)
  • CG sampling rate
    Continuously after initial warm-up period (warm up period is approximately 2.5 minutes)

Product questions

  • Gregg Holzer
    02/19/2024, 12:23 AM

    Does the alarm have a backup power source such that it will continue to work during a power failure?

    Administrator
    02/19/2024, 08:39 AM

    It does not

  • Marty Mylott
    01/20/2024, 01:05 PM

    If gas is detected , does this device turn off the power to the valve?

    Administrator
    01/20/2024, 01:38 PM

    No it does not

  • Debbie Sparks
    09/25/2021, 10:26 AM

    Where is the best location to put this near a gas log heater? I have had one for 10 years and it literally on the floor. Should I raise it to 5 feet?

    Administrator
    09/27/2021, 09:57 AM

    The gases you are seeking are heavier than air so lower is better.

  • Janice Schumacher
    07/18/2019, 12:28 AM

    Will it detect the gas smell from a gas range

    Administrator
    07/18/2019, 09:45 AM

    This does not detect smell. The alarm sounds if the air reaches 25% of the lower explosive level. To put it simply if the air contains 25% of the amount of natural gas, propane, or butane for an explosion the alarm will sound. If you don't have elevated levels of these gases the alarm will not sound.

Customers who bought this product also bought