Categories
Previous image
Warthog WT 1/2" Classic Sewer Jetter Nozzle
Next image
Zoom image

Warthog WT 1/2" Classic Sewer Jetter Nozzle

SKU# - WT-12

The smaller Classic series WARTHOG models can negotiate elbows and clean-outs commonly found in laterals at homes, buildings, restaurants and other light commercial facilities. This tool is most commonly used on small capacity pumps and cart jetters. Also an excellent choice for cutting roots, clearing ice and removing blockages.

  • $1031.00
Qty:  
FREE SHIPPING
Add a different product to compare

Warthog WT Sewer Jetter Nozzle - 1/2in.

Our smaller Classic series WARTHOG models can negotiate elbows and clean-outs commonly found in laterals at homes, buildings, restaurants and other light commercial facilities. 

This tool is most commonly used on small capacity pumps and cart jetters. Also an excellent choice for cutting roots, clearing ice and removing blockages. The WT-3/8-C is designed specifically to handle 3"-6" lines and clean-outs.

Pipes made of cast iron and those that have sand or silt can act as abrasive agents that can aggressively wear out the tool. We've added permanent carbide buttons to the WT-3/8-C to increase head life. Our carbide buttons are available in all offsets and add up to 5 times the life compared to previous WT-3/8 models. It also features replaceable AP2 nozzles.

Standard: 3 port - Nozzles with a balanced jetting configuration that deliver ideal results in most conditions 

Descaling: 5 port - Nozzles with jet angles that deliver greater impact to the side of the pipe in order to remove heavy calcium deposits, scaling and sidewall build-up. 

Warthog Sewer Jetter Nozzle WT 

  • For 3" - 6" Lines with Elbows.
  • Up to 5K psi.
  • Classic Workhorse Model.
  • Navigates multiple bends.
  • Carbide wear buttons extend nozzle life.
  • For cart and trailer jetters.

Warthog WT Sewer Jetter Nozzle Specifications:


WT-1/2
Maximum Pressure4k psi
Operating Pressure1.2 - 5.0 kpsi
Rotation Speed300-500 rpm
Flow5-21 gpm
Flow Rating0.75 Cv
Pulling Force5-20 lb
Inlet Connection1/2 NPT or BSPP
Tool Diameter/Length1.9 in. x 3.4 in.
Weight Complete1.2 lb

Click Here For User Manual


Nozzle Sizing Chart:

 
                        Pressure 

   Flow Rate

1/2" WT Nozzle  2500    PSI 3000 PSI 3500 PSI 4000 PSI 4500 PSI 
9 GPM R15R12R12R12R12
12 GPM R12R12R12R12R12
15 GPM R12R12R12R12R09
18 GPM 
R12R12R09R09
21 GPM 


R09R09
    • Weight
      2 lbs
    • SKU
      WT-1/2-STD
  • Select Nozzle Type
    Standard - 3 port, Descaling - 5 port
  • Select GPM
    9 GPM, 12 GPM, 15 GPM, 18 GPM, 21 GPM
  • Select PSI Rating
    2500 PSI, 3000 PSI, 3500 PSI, 4000 PSI, 4500 PSI

Product questions

No questions yet. Be the first to ask the question!
Related products