Triplett AC Clamp Meter 400A True RMS - CM400
SKU# - CM400
The Triplett Model CM400 True RMS Clamp meter can measure AC current up to 400A without breaking the circuit by clamping around a single conductor. This saves time and the circuit will not be damaged.
Triplett True RMS AC Clamp Meter 400A - CM400
True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms. Additional measurements include Resistance, Capacitance, Frequency, Temperature, Diode Test, and Continuity. Measurements can read on the 4000 count backlit LCD. It has an Inrush current function that captures the instantaneous surge (inrush) current when power equipment is turned on.
Triplett True RMS AC Clamp Meter CM400 Features:
- True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms
- Captures the instantaneous surge (inrush) current when power equipment is turned on
- 1.2" (30mm) clamp jaw
- Low Pass Filter (LPF) for filtering frequency and harmonic interference when measuring variable frequency drives
- Peak voltage measurement with Min/Max
- Data Hold freezes the display
- Relative Mode for making comparisons to a stored reference value
- Auto power off with disable
- Built-in Flashlight
- Includes test leads, Type K thermocouple bead probe, 3 AAA batteries, and carrying case
- 1 year warranty
Triplett True RMS AC Clamp Meter CM400 Specifications:
Specifications: | CM400 |
True RMS | ✓ |
Display counts | 4000 count |
AC Current | 400A |
ACA Accuracy | ±2.5% |
DC Current | — |
AC/DC Voltage | 1000V |
Resistance | 40MΩ |
Temperature | -4 to 1832°F |
Capacitance | 100mF |
Frequency | 100kHz |
Duty Cycle | 20.0 to 80.0% |
Continuity | <50Ω |
Lo Pass Filter (LPF) | Yes |
NCV Detector | >90V |
Inrush Current | 100ms |
Safety Category | CAT III-600V |
Dimensions | 8.8 x 3 x 1.6" |
Weight | 9.5oz |