Sewerooter T-4 Drain Cleaning Machine

 The new Sewerooter T-4 does a better job of clearing inside drain lines up to 100 ft. long with 9/16” Flexicore cable. It has more torque than traditional 1/2 inch cables, yet it can be used to clear the same 3” to 4” drain lines. Need to clear tree roots too? Just switch drums to a 75 ft. x 5/8” Flexicore cable to clear 3” to 6” lines.

Sewerooter T-4 Drain Cleaning Machine Features:

• Does a better job of clearing inside drain lines up to 100 ft. long with 9/16” Flexicore cable.
• Has more torque than traditional 1/2 inch cables, yet it can be used to clear the same 3” to 4” drain lines.
• Switch to 75 ft. x 5/8” cable to add root cutting capability. Easily interchangeable drums.
• Variable speed power cable feed drives and retracts 9/16”, 5/8” and 3/4” cable at up to 20 ft. per minute.
• Handle folds for space-saving convenience in the truck.
• Drum capacity of 100 ft. of 9/16” cable, 75 ft. of 5/8” cable or 50 ft. of 3/4” cable.
• 1/3 hp capacitor motor has plenty of power to drive more than 100 ft. of cable.
• Features stair climbers, 10” ball bearing wheels, and truck loading wheel for easier handling.
• Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility.
• Made in U.S.A.

Sewerooter T-4 Drain Cleaning Machine Specifications: 

Weight: 92 lbs. without cable

Dimensions:
27” deep,
18-1/2” wide,
46” high; 26”with handle folded down.

Drum Capacity:
100 ft. x 9/16″
75 ft. x 5/8″ 

Drum Removal: Remove one bolt and slide drum off shaft.

Motor: 1/3 hp with capacitor, forward-off-reverse switch,
20 ft. power cord and ground fault circuit interrupter.

Foot Switch: Pneumatic, with no electrical contact between pedal and motor.

Power Cable Feed: Drives and retracts at variable speed of up to 20 ft. per minute.

Wheels: 10” Heavy-duty wheels with roller bearings.

Wheel Brake: Passive wheel brake system holds the machine in place on the job or in the truck.

Stair Climbers: Heavy-duty V-belts running on nylon rollers.

Truck Loading Wheel: Enables one person to lift machine onto bed of truck.

Cutter Holder: Cutter Holder on frame keeps all of the cutters within easy reach.

Leather Gloves: With double-reinforced palm for hand protection when guiding cable.

Cables: 

Left-wound Flexicore® wire rope center. 3/4″ for 4″ to 10″ lines and 3″ lines without sharp bends;
5/8″ diameter for 3″ to 6″ lines;
1/2″ diameter for 2″ to 3″ lines.

PART #	Cable Included	Guide Tube	Cutter Set	Weight
P-T4-A	Basic Unit + 75EM4 (75 ft. x 5/8")		SRCS-R	168 lbs.
P-T4-C	Basic Unit + 100EM3A (100 ft. x 9/16")		EJCS	158 lbs.