Mini Rooter Pro Cable Drain Cleaning Machine
The Mini Rooter Pro Cable Drain Cleaning Machine is an inexpensive, light weight machine with lots of time-saving features.
Mini Rooter Pro Cable Drain Cleaning Machine
For instance, you can remove the drum in seconds for more portability or to switch to a different diameter cable – with no mess and no lost time.
A distributor tube inside the drum allows you to feed cable in and out without chucking and releasing the cable every few feet – so you finish quicker.
An optional Power Cable Feed drives and retracts the cable at up to 16 feet per minute.
Some Mini-Rooter Pro safety features: A foot pedal that uses air pressure to start and stop the machines, with no electrical wiring between the pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley.
Mini Rooter Pro Cable Drain Cleaning Machine Features:
- Clears 1-1/4 inch to 3 inch lines and most 4 inch lines.
- Holds 75 ft. of 3/8″ or 50 ft. of 1/2″ Flexicore®
- Built in 6” wheels for easy transport, and folding handle for compact storage.
- 1/3 hp motor with reverse switch and pneumatic foot pedal.
- Drum removes in seconds for more portability.
- Optional J-Drum holds 50 ft. of 1/4″ or 5/16″ cables for small 1-1/4” to 2” lines.
- Optional Power Cable Feed drives and retrieves cable at up to 16 ft./min.
- Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility.
- Made in U.S.A.
Mini-Rooter Pro Cable Drain Cleaning Machine Specifications:
Weight: 43 lbs. without cable.
Dimensions: 20” D x 16” W x 38” H (20” H with handle folded)
Drum: Capacity of 75 ft. x 3/8” or 1/2” Flexicore cable. Integral distributor tube. Quickly removable from frame.
J-Drum: Capacity of 50 ft. of 1/4” or 5/16” Flexicore cable.
Wheels: 6” semi-pneumatic tires.
Folding Handle: Reduces storage space.
Cutter Set: MRCS Cutter Set consists of Arrow head, Boring Gimlet, 1-1/2 U-Cutter, 2” Side Cutter Blades. Other cutters available.
Motor: 1/3 hp, with forward-off-reverse switch, spring-loaded mounting for proper belt tension.
Load Speed: 165 rpm
Belt Guard: High impact plastic
Power Cable Feed: (Optional) Drives 3/8” and 1/2” cables. For smoother performance, switch to the XP drum with inner drum cage.
Foot Pedal: Leaves operator’s hands free to control cable. Uses air pressure, so there’s no electrical contact between pedal and motor.
Power Cord: 10 ft. 3-wire vinyl covered with molded plug. In-line ground fault circuit interrupter.
Leather Gloves:
With double-reinforced palm, for hand protection when guiding cable.
|
-
Select Unit:GW-MRP - Basic Unit: MR-200 Drum, 1/3 hp Motor w/Rev. Switch, 10 ft. Power Cord w/GFI, Water-Proof Air Foot Switch, Handle & Wheels Assembly, Leather Gloves, GW-MRP-J - Basic Unit: Same as above, but with MR-250 J-Drum* instead of the MR-200 Drum, GW-MRP-A - Basic Unit +50 ft. x 3/8", MRCS Cutter Set, GW-MRP-B - Basic Unit + 75 ft. x 3/8", MRCS Cutter Set, GW-MRP-C - Basic Unit + 50 ft. x 1/2", MRCS Cutter Set