Categories
Previous image
Sewer Jetter Conversion Kit
Next image
Zoom image

Sewer Jetter Conversion Kit for 5 to 13 HP Engines

SKU# - COVKIT-02

Pressure Washer to Sewer Jetter Conversion Kits, designed for 5 to 13 HP engines. With this kit, you can effortlessly transform your pressure washer into a highly efficient sewer jetter. Capable of cleaning pipes up to 8 inches in diameter, it offers a convenient solution for maintaining your drainage system.

  • $499.00
Qty:  
In stock (3 items available)
Add a different product to compare

Pressure Washer to Sewer Jetter Conversion Kits For 5 to 13 HP Engines

CLEANS PIPES UP TO 8"

By installing this kit to your pressure washer you can convert it to a sewer jetter.

Here's How The Pressure Washer to Sewer Jetter Conversion Works

Set up your pressure washer outside to get started.

Attach your pressure washer hose to your pressure washer and run the other end of the hose to the inside or outside drain you want to clean.

Remove your gun/wand and attach the provided ball valve jumper hose and hose reel.

Install the provided jetter hose onto the hose reel and attach the desired nozzle for the job at hand.

Thast's it.  You are now ready to use your existing pressure washer as a sewer jetter and clean your drain pipes.

Safe for up to 4000 psi.




Ships in 3 or 4 days.

Pressure Washer to Sewer Jetter Conversion Kits Come Complete With:

  • 3/8" Ball Valve with Quick Couplers
  • 5 ft Jumper Hose with Quick Couplers
  • Hose Reel With Stand
  • 1/4" Jetter Hose (100 ft x 1/8" Jetter Hose Also Available)
  • Laser Nozzle (1 Forward Jet, 3 Back Jets)
    • Dislodges blockages
  • Ram Nozzle (3 Back Jets)
    • Flushes loose debris
  • Rotating Nozzle (2 Side Jets, 2 Back Jets)
    • Polishes and maximizes line recovery

90 Day Parts And Labor Warranty

Assembly option means the kit is delivered assembled except the handle which requires 2 bolts/nuts for completion.

Click Here For Parts Diagram

Click Here For Jetting Instruction Manual

Click Here For Dyna-Flex Sewer Jetting Hose Specs

Built In The USA

    • Weight
      50 lbs
    • SKU
      COVKIT-02-2
  • SKU
    COVKIT-02
  • Manufacturer
    BossJet Sewer Jetters
  • Warranty
    90 Day
  • Kit Includes:
    3/8 in. Ball Valve with Quick Couplers
    5 ft. Jumper Hose with Quick Couplers
    Hose Reel With Stand
    1/4 in. Jetter Hose
    Laser Nozzle (1 Forward Jet, 3 Back Jets)
    Dislodges blockages
    Ram Nozzle (3 Back Jets)
    Flushes loose debris
    Rotating Nozzle (2 Side Jets, 2 Back Jets)
    Polishes and maximizes line recovery
  • Hose Length
    100ft 1/4in Hose & Reel, 150ft 1/4in Hose & Reel, 200ft 1/4in Hose & Reel

Product questions

  • Shawn F.
    02/10/2024, 09:31 AM

    How ridgid is the hose? I bought a cheap one from amazon, but the hose is not ridgid enough to make turns more tha a couple feet away fromm insertion point.

    Administrator
    02/10/2024, 04:00 PM

    It is somewhat stiff. Please let us know what power your pressure is so we can be more help.

  • Chris
    02/08/2024, 07:44 PM

    Hi I have a question on the pressure washer I should get for the conversation kit. The 4000 psi units are a bit pricey. If I purchase a 3600 or a 3800 with a gpm lower then 3.00 would that be good to jet a line. Thanks

    Administrator
    02/08/2024, 07:51 PM

    That may leave you a bit light depending on the size of the pipe and the density of the blockage. There are a lot of factors that will affect your success. Most nozzle manufacturers recommended 4000psi 4gpm

  • Kyle B
    01/18/2024, 11:57 PM

    What’s the max temp for the hose? Hot water safe?

    Administrator
    01/19/2024, 07:12 AM

    It comes with a Dyna-Flex hose that has a max temp of 150F. We can substitute a Piranha hose, if requested, that has a max temp of 160F.

  • David Chong
    09/15/2022, 06:50 PM

    Jetter kit with reel come with all the fitting as need

    Administrator
    09/16/2022, 08:57 AM

    Yes, the conversion kit comes with all fittings needed.

  • Bob
    02/21/2022, 12:49 PM

    What length is the hose pictured? I only see the length of the 1/4" hose in the description. I'm assuming it comes with a 3/8" hose.

    Administrator
    02/21/2022, 01:01 PM

    You can select the diameter and length on the drop down menu on the page. If you need 3/8” please use the url below.
    https://www.toolexperts.com/jetter-conversion-kit/sewer-jetter-conversion-kit-for-13-to-24-hp-engines

Related products