Mini Rooter Pro Cable Drain Cleaning Machine

Mini Rooter Pro Cable Drain Cleaning Machine 

For instance, you can remove the drum in seconds for more portability or to switch to a different diameter cable – with no mess and no lost time. 

A distributor tube inside the drum allows you to feed cable in and out without chucking and releasing the cable every few feet – so you finish quicker. 

An optional Power Cable Feed drives and retracts the cable at up to 16 feet per minute.

Some Mini-Rooter Pro safety features: A foot pedal that uses air pressure to start and stop the machines, with no electrical wiring between the pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley.

Mini Rooter Pro Cable Drain Cleaning Machine Features: 

• Clears 1-1/4 inch to 3 inch lines and most 4 inch lines.
• Holds 75 ft. of 3/8″ or 50 ft. of 1/2″ Flexicore®
• Built in 6” wheels for easy transport, and folding handle for compact storage.
• 1/3 hp motor with reverse switch and pneumatic foot pedal.
• Drum removes in seconds for more portability.
• Optional J-Drum holds 50 ft. of 1/4″ or 5/16″ cables for small 1-1/4” to 2” lines.
• Optional Power Cable Feed drives and retrieves cable at up to 16 ft./min.
• Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility.
• Made in U.S.A.

Mini-Rooter Pro Cable Drain Cleaning Machine Specifications:

Weight: 43 lbs. without cable.

Dimensions: 20” D x 16” W x 38” H (20” H with handle folded) 

Drum: Capacity of 75 ft. x 3/8” or 1/2” Flexicore cable. Integral distributor tube. Quickly removable from frame.

J-Drum: Capacity of 50 ft. of 1/4” or 5/16” Flexicore cable.

Wheels: 6” semi-pneumatic tires.

Folding Handle: Reduces storage space.

Cutter Set: MRCS Cutter Set consists of Arrow head, Boring Gimlet, 1-1/2 U-Cutter, 2” Side Cutter Blades. Other cutters available.

Motor: 1/3 hp, with forward-off-reverse switch, spring-loaded mounting for proper belt tension.

Load Speed: 165 rpm

Belt Guard: High impact plastic

Power Cable Feed: (Optional) Drives 3/8” and 1/2” cables. For smoother performance, switch to the XP drum with inner drum cage.

Foot Pedal: Leaves operator’s hands free to control cable. Uses air pressure, so there’s no electrical contact between pedal and motor.

Power Cord: 10 ft. 3-wire vinyl covered with molded plug. In-line ground fault circuit interrupter.

Leather Gloves:
With double-reinforced palm, for hand protection when guiding cable.

PART # What's Included w/Cutter Set MRP Basic Unit: MR-200 Drum, 1/3 hp Motor w/Rev. Switch, 10 ft. Power Cord w/GFI, Water-Proof Air Foot Switch, Handle & Wheels Assembly, Leather Gloves MRP-J Basic Unit: Same as above, but with MR-250 J-Drum* instead of the MR-200 Drum MRP-A Basic Unit + 50EM2 (50 ft. x 3/8"), MRCS Cutter Set MRP-B Basic Unit + 75EM2 (75 ft. x 3/8"), MRCS Cutter Set MRP-C Basic Unit + 50EM3 (50 ft. x 1/2"), MRCS Cutter Set