:
from
to
Moisture Meter - Pin and Pinless Deep Sensing MMD950
SKU: MMD950
SKU# - MMD950
Moisture Meter Pin and Pinless Deep Sensing Meter with Spherical Sensor & Remote Probe
Moisture Meter Pin and Pinless Deep Sensing with Spherical Sensor & Remote Probe MMD950
This pin/pinless moisture meter is Ideal for contractors, woodworkers and homeowners.
This new precision specialty instrument by General Tools is most commonly used to detect moisture/water damage under tiling, locate moisture in sub-floors beneath carpeting and wood flooring, and check moisture in masonry.
Two different modes (pin invasive mode - uses replaceable pins at the end of a 46 in. cable; pinless non invassive mode uses an integral spherical sensor) enable users to measure moisture in corners, hard-to-reach areas, narrow spaces and uneven surfaces.
The spherical sensor measures the average moisture level up to a depth of 4 in., and its small contact area provides superb repeatability.
The auto-calibrating meter works in any position, can accommodate a wide viewing angle and, with its strong RF sensor, can detect moisture where other meters fail (e.g., masonry).
Pin/Pinless Moisture Meter Features:
Two measurement modes: Pin and Pinless
Pin mode uses replaceable pins at end of 46 in. cable; pinless mode uses integral ball sensor with 4 in. measurement depth
Displays % WME or relative readings simultaneously on two displays: 0 to 99.9 count jumbo LCD, and 40-dot tri-color LED bar graph
Auto-calibrating
Data hold function
User can turn beep sound, backlight andauto power off function on or off
Low battery warning
Spare pins storage compartment
Click Here to See Manufacturer's Manual
Click Here to Compare General Tools Moisture Meters
MMD950 Moisture Meter Specifications:
Measurement range/resolution: 6.0 to 87.6% WME (Wood Moisture Equivalent) and 0.1 to 99 REL/0.1%
Measurement accuracy in pin mode: 3% of reading +5 digits
Length of remote probe cable: 46 in.
Pinless measurement depth: 4 in.
LCD digit height: 0.9 in.
LED bar graph composition/colors: 40 dots/green, red, yellow
Bar graph resolution: 1 LED (2.5%)
Auto power off trigger: After 3, 5 or 10 minutes (user selectable) with 0% reading
Operating temperature: 32° to 122°F @<80%RH
Weight: 8 oz.
Power source: "9V" battery (included)
Measurement accuracy in pin mode: 3% of reading +5 digits
Length of remote probe cable: 46 in.
Pinless measurement depth: 4 in.
LCD digit height: 0.9 in.
LED bar graph composition/colors: 40 dots/green, red, yellow
Bar graph resolution: 1 LED (2.5%)
Auto power off trigger: After 3, 5 or 10 minutes (user selectable) with 0% reading
Operating temperature: 32° to 122°F @<80%RH
Weight: 8 oz.
Power source: "9V" battery (included)
MMD950 Moisture Meter Includes:
External probe with 0.4 in. long pins
Battery
Two sets of extra pins item # PIND4E
Custom hard plastic carrying case
User’s manual
Optional - 5" Deep Wall Probe - Moisture Sensor Available Item # MP905 (Sold Separately)
One Year Limited Manufacture's Warranty
- ManufacturerGeneral Tools and Instruments
- Shipping Weight8 oz.
- Power Source9V battery
- WarrantyOne year warranty
- Measurement range/resolution:6.0 to 87.6% WME (Wood Moisture Equivalent) and 0.1 to 99 REL/0.1%
- Measurement accuracy in pin mode:3% of reading +5 digits
- Length of remote probe cable:46 in. (1.168m)
- Pinless measurement depth:4 in. (101mm)
- LCD digit height:0.9 in. (22.9mm)
- LED bar graph composition/colors:40 dots/green, red, yellow
- Bar graph resolution:1 LED (2.5%)
- Auto power off trigger:After 3, 5 or 10 minutes (user selectable) with 0% reading
- Operating temperature:32° to 122°F (0 to 50C) @
Related products
- Free shipping
