- 30% less
:
from
to
Mortise & Tenon Jig Machine- EZ Pro 870
SKU: GT870
SKU# - GT870
General Tools Model 870 EZ Pro Mortise & Tenon Jig is ready to use right out-of-the-box to produce 1/4" mortise and tenon joints for cabinets, furniture and frames.
EZ Pro Mortise & Tenon Jig 870
General Tools Model 870 EZ Pro Mortise & Tenon Jig is ready to use right out-of-the-box to produce 1/4" mortise and tenon joints for cabinets, furniture and frames.
EZ Pro Mortise & Tenon Jig provides a quick and easy, all-in-one solution to cut both a matching mortise and tenon with a single inexpensive jig.
Included with this Mortise and Tenon machine are the bushings for also producing 3/8" and 1/2" joints.
Designed To Work With 1/4" Routers.
Using a plunge router with the jig, woodworkers can cut fully aligned mortises and tenons ranging from 1/4" to 1/2" wide and from 1 to 3" long.
The unit can be mounted directly on a workbench or onto a board that can be clamped in a vise or to a bench.
The Mortise & Tenon Joint has been used for thousands of years. But not until now did someone figure out a way to provide a quick and easy, all-in-one solution to cut both a matching mortise and tenon with a single inexpensive jig.
The General Tools EZ Pro Mortise & Tenon Jig is the answer!
The jig comes completely assembled and is ready to use right out-of-the-box to produce the widely used 1/4" mortise and tenon joint. Using a plunge router with the jig, woodworkers can quickly and easily cut both mortises and tenons ranging from 1/4" to 1/2" thick and from 1" to 3" wide. The unit can easily handle stock ranging from 1/2" to 1-1/2" thick and can cut multiple mortises in a single long piece.
Product questions
- 02/14/2022, 05:50 PM
What diameter router base opening holes will these collars fit into?
02/15/2022, 09:41 AMIt is designed for routers with a 1-3/16" base plate opening.
- 07/21/2021, 07:41 AM
How about floating tenons? Any reviews or instructions?
Porter-Cable or Bosch plunge router OK?
Please advise.
Thanks.
Thom07/21/2021, 09:21 AMHi Thom, you won't have a problem. This system will make the measurements for your mortises very exact.
https://www.youtube.com/watch?v=ESKwcBYGSEc - 12/11/2020, 10:22 PM
Will this jig work for attaching drawer sides to drawer front? Material is 1/2"x 5 -3/8" baltic birch. Thank you!
12/14/2020, 09:27 AMYes it will as long as the wood is 1/2" to 1-1/2" thick
- 11/06/2020, 12:49 PM
Is their a video I can watch before I decide on the product
11/06/2020, 01:30 PMPlease scroll down in the description.
- 06/01/2020, 09:52 AM
Will this jig work with 1/2 inch router
06/01/2020, 11:14 AMThis jig is specifically designed for a 1/4" router.
Related products
- 47% less
- 14% less
- 5% less
- 29% less
