Previous image
Automatic Slope Laser Level - NRL800XK
Next image
Zoom image

Automatic Slope Laser Level - NRL800XK

The NRL800X is a Slope True Grade Laser capable of +/- 8 deg dial-in grade. It is 1/16" accurate at 100 feet, and is equipped with an electric servo motor to ensure automatic and accurate leveling. 

  • $1324.00
Add a different product to compare

Automatic Slope Laser Level - NRL800XK

The NRL800XK Automatic Slope Laser Level has two beams to give it versatility in leveling and plumbing. It also has tremendous value in applications ranging from leveling concrete forms, to ramps, and drainage. 

Self-leveling within ±5 degrees, this construction laser has a manual grade capability of ±8 percent. The NRL800X self-leveling laser features a horizontal and plummet laser beam with a grade setting range of ten percent. For a speedy and accuracy leveling, it comes with high-performance Electronic Servo Motors. Plus, it includes a bump sensor to prevent costly mistakes.

The Northwest Instrument NRL800X features a graphic LCD display and keypad for fast and easy grading operation. With an IP54 rating, this leveling tool is protected from dust and water. It uses rechargeable NiCD batteries that power the unit up to 15 hours. In addition, it comes with a 5/8-11 tripod screw for an easy tripod mounting.

Common Uses:

  • Setting Up Concrete Forms
  • Checking Elevations
  • Establishing Accurate Grades
  • Vertical Alignment

Automatic Slope Laser Level Features:

  • Programmable grade mode. Can be programmed +/- 8% in increments of one thousandth.
  • Working range of 2000 ft (610m) with the NLD5G detector
  • Accuracy of 1/16in. (1.6mm) horizontal and 1/8in. (3.2mm) vertical at 100ft. (30.5m).
  • Height of Instrument Protection (HI), in case the instrument or surface that it is mounted on gets moved or bumped. When the HI feature is on, the instrument will not self-level after being taken out of level. This feature is commonly used when the user will be taking measurements and not near the instrument.
  • Hold Mode will is to be used when manual leveling is desired only.
  • Scan and point mode will concentrate the beam in one area, in the event the 360 beam is not needed.
  • Vertical measure by placing instrument handle down or securing to provided bracket & securing to a tripod (Optional)
  • The battery life for the NRL800X is approximately 15 hours with a charging time of approximately 4 hours.

Automatic Slope Laser Level Specifications: 

  • Laser Beam: Horizontal & Zenith
  • Wave Length: 635 nm
  • Rotating Speed: 0 - 600 rpm
  • Operating Range: up to 2,000 ft with Detector
  • Leveling Accuracy: 1/16" in @ 100 ft horizontal;1/8" in @ 100 ft vertical
  • Self Leveling Range: +/- 5 deg
  • Self Leveling Method: Electronic Servo Motors
  • Programmable Grade Settings: +/- 8 deg
  • Power Source: Rechargeable Battery
  • Tripod Adapter: 5 / 8 x 11 thread

The NRL800XK Includes:

  • Remote Control
  • Rechargeable Batteries & Charger
  • Bracket
  • Grid Target
  • Glasses
  • Carrying Case
  • Manual

3 Year Warranty - Manufacturer Defect

    • Weight
      15 lbs
    • SKU
  • Manufacturer
    Northwest Instrument Inc.
  • Dimensions
  • Product Weight
    15 lbs
  • Power Source
    Rechargeable Battery
  • Warranty
    3 Year Warranty on Manufacturer Defects Only
  • Laser Beam
    Horizontal & Zenith
  • Wave Length
    635 nm
  • Operating Range
    up to 2,000 ft ( with Detector)
  • Leveling Accuracy
    1/16 in @ 100 ft horizontal
    1/8 in @ 100 ft vertical
  • Grade Setting Method
    Dial-in Automatic
  • Slope Range
    ± 8%
  • Self Leveling Range
    ± 5º
  • Tripod Adaptor
    5/8 x 11 Thread
  • Rotating Speed
    0 - 600 rpm
  • Self Leveling Method
    Electronic Servo Motors

Product questions

No questions yet. Be the first to ask the question!
Related products