- Free shipping
Reaper Jetter Nozzle 1 inch - RS 1630
Reaper 1" Jetter Nozzle - Ideal for 6" - 18" pipes.
These heavy-duty, high impact nozzles are constructed with stainless steel housing and tungsten carbide wear surfaces to withstand harsh environments and provide longer life than ceramic nozzles.
Reaper Jetter Nozzle 1 inch
Please see Chart Below for Accurate Nozzle Sizing
The Reaper’s rotating front jet is a 0-degree, straight water stream that blasts at up to 4000 PSI while rotating at an optimal speed to form a 30-degree cone of coverage. Reaper’s rear jets create maximum thrusting and pulling power.
- Durable
- Efficient
- Repairable
Reaper Jetter Nozzle 1 inch Specifications:
Minimum Inlet Pressure: 1,500 PSI (103 bar)
Maximum Inlet Pressure: 4,000 PSI (276 bar)
Maximum Water Temperature: 180ºF (+82ºC)
Housing Material: Stainless Steel
Nozzle Tip & Seat Material: Tungsten Carbide
Inlet Connection Thread: 1/2” FNPT
Front (Rotating) Spray Angle: 30º
Rear (Static) Spray Angle: 20º
SKU | Model | Flow at 3000 psi |
---|---|---|
1003155-400 | RS 1630 #40 | 39.8 gpm |
1003155-600 | RS 1630 #60 | 60.6 gpm |
1003155-800 | RS 1630 #80 | 74.5 gpm |
Product questions
- 05/30/2024, 08:49 PM
Truck has pump rated flow rat3 22.2 GPM and pump rated pressure 2538psi itβs a hydro vac. Do you have a nozzle that would work for use. We have been asked to clean out small culverts and pipe up to 19β , mostly dirt and ice in winter.
05/30/2024, 09:11 PMFor that psi and gpm you should probably be running 1/2β. At your psi the 1 inch reaper would need 35gpm. You are very close to the specs for the 1/2β Reaper to run at optimum efficiency.
Related products
- Free shipping