|
Reaper Jetter Nozzle 1/2 inch - RS 830
Reaper 1/2" Jetter Nozzle - Ideal for 4" - 8" pipes.
These heavy-duty, high impact nozzles are constructed with stainless steel housing and tungsten carbide wear surfaces to withstand harsh environments and provide longer life than ceramic nozzles.
Reaper Jetter Nozzle 1/2 inch - RS 830
Please see Chart Below for Accurate Nozzle Sizing
The Reaper’s rotating front jet is a 0-degree, straight water stream that blasts at up to 4000 PSI while rotating at an optimal speed to form a 30-degree cone of coverage. Reaper’s rear jets create maximum thrusting and pulling power.
- Durable
- Efficient
- Repairable
Reaper Jetter Nozzle 1/2 inch Specifications:
Minimum Inlet Pressure: 1,500 PSI (103 bar)
Maximum Inlet Pressure: 4,000 PSI (276 bar)
Maximum Water Temperature: 180ºF (+82ºC)
Housing Material: Stainless Steel
Nozzle Tip & Seat Material: Tungsten Carbide
Inlet Connection Thread: 1/2” FNPT
Front (Rotating) Spray Angle: 30º
Rear (Static) Spray Angle: 20º
| Flow Rate PSI | @1500 | @2000 | @2500 | @3000 | @3500 | @4000 |
| Nozzle Size 12.0 #1003032-120 | 7.3 GPM | 8.5 GPM | 9.5 GPM | 10.4 GPM | 11.2 GPM | 12.0 GPM |
| 15.0 #1003032-150 1 | 9.2 GPM | 10.6 GPM | 11.9 GPM | 13.0 GPM | 14.0 GPM | 15.0 GPM |
| 18.0 #1003032-180 | 11.0 GPM | 12.7 GPM | 14.2 GPM | 15.6 GPM | 16.8 GPM | 18.0 GPM |
| 24.0 #1003032-240 | 14.7 GPM | 17.0 GPM | 19.0 GPM | 20.8 GPM | 22.4 GPM | 24.0 GPM |
