Sewer Jetter Conversion Kit - Deluxe

SKU: COVKIT-D

Pressure Washer to Sewer Jetter Conversion Kits, designed for 5 to 13 HP engines. With this kit, you can effortlessly transform your pressure washer into a highly efficient sewer jetter. Capable of cleaning pipes up to 8 inches in diameter, it offers a convenient solution for maintaining your drainage system. This kit includes a mounted ball valve, psi gauge and nozzle holders.

Ask a question (4)

Pressure Washer to Sewer Jetter Conversion Kits For 5 to 13 HP Engines

CLEANS PIPES UP TO 8"

By installing this kit to your pressure washer you can convert it to a sewer jetter.

Here's How The Pressure Washer to Sewer Jetter Conversion Works

Set up your pressure washer outside to get started.

Attach your pressure washer hose to your pressure washer and run the other end of the hose to the inside or outside drain you want to clean.

Remove your gun/wand and attach the provided ball valve jumper hose and hose reel.

Install the provided jetter hose onto the hose reel and attach the desired nozzle for the job at hand.

That's it. You are now ready to use your existing pressure washer as a sewer jetter and clean your drain pipes.

Safe for up to 4000 psi.

Pressure Washer to Sewer Jetter Conversion Kits Come Complete With:

1/4" Ball Valve with Quick Couplers
5 ft Jumper Hose with Quick Couplers
Hose Reel With Stand
1/4" Jetter Hose
Laser Nozzle (1 Forward Jet, 3 Back Jets)
- Dislodges blockages
Laser/Flusher (1 Forward Jet, 6 Back Jets)
- Dislodges and Flushes Loose Debris
Flusher Nozzle(3 Back Jets)
- Flushes Loose Debris

90 Day Parts And Labor Warranty

Click Here For Parts Diagram

Click Here For Jetting Instruction Manual

Click Here For Dyna-Flex Sewer Jetting Hose Specs

Built In The USA

- SKU
  COVKIT-D-100
- Weight
  45.35 lbs
- Dimensions (L x W x H)
  20 x 20 x 25 in
SKU
COVKIT-D
Manufacturer
BossJet Sewer Jetters
Warranty
90 Day
Hose Length
100ft 1/4in Hose & Reel, 150ft 1/4in Hose & Reel, 200ft 1/4in Hose & Reel

Product questions

Donald P Koontz Jr
12/20/2025, 07:16 PM
I don’t see a handle to turn reel to wind it up?
Administrator
12/20/2025, 08:37 PM
There is a handle but we did not install for pictures and we did not realize. The reel handle goes on the opposite side of the carry handle.
Ryan C
10/08/2025, 11:17 AM
Can this be purchased without the hose and the nozzles?
Administrator
10/09/2025, 09:37 AM
Yes you can:
https://www.toolexperts.com/sewer-and-pipe-cleaning/sewer-jetter-accessories/reels/hose-reel-with-ball-valve-and-psi-gauge-1-4-x-200-max
Corey J. Jackson
07/07/2025, 06:43 PM
Do you sell a water reservoir that can attach to a pressure washer with the inlet and outlet for a water hose?
Administrator
07/07/2025, 07:44 PM
The only thing similar to what you are talking about would be a tank. But again you need something to create enough pressure to feed the pump
Corey J. Jackson
07/04/2025, 06:19 PM
Am I able to connect a water reservoir to the sewer Jetter
Administrator
07/07/2025, 07:27 AM
That would depend on your pump. Most pumps are designed to either pull water from the source or catch water from the source. The water has to have some pressure for the pumps that catch water.