- Free shipping
:
from
to
Sewer Jetter Conversion Kit for 5 to 13 HP Engines
SKU: COVKIT-02
Pressure Washer to Sewer Jetter Conversion Kits, designed for 5 to 13 HP engines. With this kit, you can effortlessly transform your pressure washer into a highly efficient sewer jetter. Capable of cleaning pipes up to 8 inches in diameter, it offers a convenient solution for maintaining your drainage system.
Pressure Washer to Sewer Jetter Conversion Kits For 5 to 13 HP Engines
CLEANS PIPES UP TO 8"
By installing this kit to your pressure washer you can convert it to a sewer jetter.
Here's How The Pressure Washer to Sewer Jetter Conversion Works
Set up your pressure washer outside to get started.
Attach your pressure washer hose to your pressure washer and run the other end of the hose to the inside or outside drain you want to clean.
Remove your gun/wand and attach the provided ball valve jumper hose and hose reel.
Install the provided jetter hose onto the hose reel and attach the desired nozzle for the job at hand.
Thast's it. You are now ready to use your existing pressure washer as a sewer jetter and clean your drain pipes.
Safe for up to 4000 psi.
Pressure Washer to Sewer Jetter Conversion Kits Come Complete With:
- 3/8" Ball Valve with Quick Couplers
- 5 ft Jumper Hose with Quick Couplers
- Hose Reel With Stand
- 1/4" Jetter Hose (100 ft x 1/8" Jetter Hose Also Available)
- Laser Nozzle (1 Forward Jet, 3 Back Jets)
- Dislodges blockages
- Ram Nozzle (3 Back Jets)
- Flushes loose debris
- Rotating Nozzle (2 Side Jets, 2 Back Jets)
- Polishes and maximizes line recovery
90 Day Parts And Labor Warranty
Click Here For Jetting Instruction Manual
Click Here For Dyna-Flex Sewer Jetting Hose Specs
Built In The USA
- SKUCOVKIT-02
- ManufacturerBossJet Sewer Jetters
- Warranty90 Day
- Kit Includes:3/8 in. Ball Valve with Quick Couplers
5 ft. Jumper Hose with Quick Couplers
Hose Reel With Stand
1/4 in. Jetter Hose
Laser Nozzle (1 Forward Jet, 3 Back Jets)
Dislodges blockages
Ram Nozzle (3 Back Jets)
Flushes loose debris
Rotating Nozzle (2 Side Jets, 2 Back Jets)
Polishes and maximizes line recovery - Hose Length100ft 1/4in Hose & Reel, 150ft 1/4in Hose & Reel, 200ft 1/4in Hose & Reel
Product questions
- 04/24/2025, 06:03 PM
Any idea how far out you are on getting in the 150 ft, 1/4 inch hose and reel?
04/25/2025, 10:08 AMOur website was incorrect. They are in stock
- 04/24/2025, 04:19 PM
1. I have 4000 psi 4.0 gpm pressure washer.
2. I am concerned about the 1/4 inch hose buckling in the pipe. Can use the 3/8 hose unit that is rated for a larger pressure washer instead (just to get more beef in the hose)?04/24/2025, 04:26 PMThe pressure in the hose will keep it solid in the pipe. 4000psi and 4gpm is exactly what we would recommend a 1/4" hose for. This will give you the best performance because of the amount of water your pump is able to process.
- 02/10/2024, 09:31 AM
How ridgid is the hose? I bought a cheap one from amazon, but the hose is not ridgid enough to make turns more tha a couple feet away fromm insertion point.
02/10/2024, 04:00 PMIt is somewhat stiff. Please let us know what power your pressure is so we can be more help.
- 02/08/2024, 07:44 PM
Hi I have a question on the pressure washer I should get for the conversation kit. The 4000 psi units are a bit pricey. If I purchase a 3600 or a 3800 with a gpm lower then 3.00 would that be good to jet a line. Thanks
02/08/2024, 07:51 PMThat may leave you a bit light depending on the size of the pipe and the density of the blockage. There are a lot of factors that will affect your success. Most nozzle manufacturers recommended 4000psi 4gpm
- 01/18/2024, 11:57 PM
What’s the max temp for the hose? Hot water safe?
01/19/2024, 07:12 AMIt comes with a Dyna-Flex hose that has a max temp of 150F. We can substitute a Piranha hose, if requested, that has a max temp of 160F.
Customers who bought this product also bought
- Free shipping
- Free shipping
- Free shipping
