Categories
Reaper Jetter Nozzle
Zoom image

Reaper Jetter Nozzle 3/8 Inch - RS 624

SKU# - RS624

Reaper Jetter Nozzle - Ideal for 3"-6" Lines 

These heavy-duty, high impact nozzles are constructed with stainless steel housing and tungsten carbide wear surfaces to withstand harsh environments and provide longer life than ceramic nozzles.

  • $760.00
Qty:  
FREE SHIPPING
Add a different product to compare

Reaper Jetter Nozzle 3/8 Inch - RS 624

Please see Chart Below for Accurate Nozzle Sizing 

The Reaper’s rotating front jet is a 0-degree, straight water stream that blasts at up to 4000 PSI while rotating at an optimal speed to form a 24-degree cone of coverage. Reaper’s rear jets create maximum thrusting and pulling power.

Reaper Jetter Nozzle 3/8" Specifications:

Minimum Inlet Pressure: 1,500 PSI (103 bar)
Maximum Inlet Pressure: 4,000 PSI (276 bar)
Maximum Water Temperature: 180ºF (+82ºC)
Housing Material: Stainless Steel
Nozzle Tip & Seat Material: Tungsten Carbide
Inlet Connection Thread: 3/8” FNPT
Front (Rotating) Spray Angle: 24º
Rear (Static) Spray Angle: 20º


Flow Rate Chart:

Flow Rate @ 1500 @2000 @2500 @3000@3500@4000
Nozzle Size
      6.0
#1003031-060
3.7 GPM4.2 GPM4.7 GPM5.2 GPM5.6 GPM6.0 GPM
      9.0
#1003031-090
5.5 GPM6.4 GPM7.1 GPM7.8 GPM8.4 GPM9.0 GPM
    12.0
#1003031-120
7.3 GPM8.5 GPM9.5 GPM10.4 GPM11.2 GPM12.0 GPM
    • Weight
      2 lbs
    • SKU
      RS624-6
  • Manufacturer
    Hydra-Flex
  • Select Nozzle By Flow At 4000psi
    6 gpm, 9 gpm, 12 gpm

Product questions

  • jason
    02/29/2024, 10:25 AM

    4000psi, 5.5gpm will the reaper work? 3/8 line.

    Administrator
    02/29/2024, 11:06 AM

    Yes it will work. You will get a little better performance by turning your psi down. You would get a bit better performance going to a 1/4" line to optimize your pumps output better.

  • Shawn
    01/26/2024, 11:19 PM

    I have an 18 gpm @ 4000 psi , I use a 200 ft 3/8 hose connected to a 1/2 hose, do you have to size the nozzle to these specs , and or what would it be which nozzle for the 3/8

    Administrator
    01/27/2024, 11:21 AM

    That output is more gpm than the 3/8 nozzles are made for and more than we would typically recommend for a 3/8 nozzle. The RS830 1/2 inch nozzle would match up perfectly with your machine.

Related products