Cable Drain Cleaning Machine - SpeedRooter 92

Cable Drain Cleaning Machine - SpeedRooter 92

The Speedrooter 92R with power cable feed makes the job of drain cleaning easier, faster and cleaner for your customers. Instead of wrestling with a manual snake in and out of the line, the power cable feed drives the cable into the line at up to 20 feet per minute. Put the feed in reverse and it retracts the cable easily too. Some cables weigh up to 100 lbs. so this is a real labor savor.

SpeedRooter 92 Cable Drain Cleaning Machine Features:

• Clears tree roots and tough stoppages in 3 inch to 10 inch drains.
• Open cage holds 100 ft. of 3/4 inch or 5/8 inch Flexicore^®
• Open cage lets you see cable condition after each rental.
• Variable speed Power Cable Feed easily drives and retrieves cable at up to 20 ft/min.
• Guide tube reduces cable drag and keeps hands off of rotating cable.
• Features stair climbers, 10 inch heavy-duty ball bearing wheels, truck loading wheel, and tool box.
• 1/3 hp motor with momentary contact reverse switch.
• Adjustable height handle can be 3″ taller or more compact.
• Made in U.S.A.

SpeedRooter 92 Cable Drain Cleaning Machine Specifications:

Weight: 115 lbs. without cable.

Dimensions: 26 inch deep, 22 inch wide, 41 inch high.

Drum: Drum holds 100 ft x 3/4 inch or 5/8 inch cable.

Drum Removal: Loosen two knobs, remove ringbolt, and lift off.

Motor: 1/3 hp heavy duty, capacitor start, thermal overload protection, Forward/Off/Momentary Contact Reverse Switch.

Foot Switch: Pneumatic, with no electrical contact between pedal and motor.

Power Cable Feed: Drives and retracts at variable speeds of up to 20 ft. per minute.

Cable Guide Tube: Keeps operators hands clean and off spinning cable. 5 ft. extensions available.

Wheels: 10 inch Heavy-duty wheels with roller bearings.

Stair Climbers: Heavy-duty V-belts running on nylon rollers.

Passive Wheel Brake: Keeps machine in place on the job or in the truck.

Folding Handle: Tall enough to make it easy to move to the job, yet quickly folds to take less room in vehicle.

Truck Loading Wheel: Enables one person to lift machine onto bed of truck.

Tool Box: Attached to rear of machine. Holds all cutters.

Leather Gloves: With double-reinforced palm for hand protection when guiding cable.

Cables: Left wound Flexicore® wire rope center 3/4” diameter for 4 inch to 10 inch lines and 3 inch lines without sharp bends; 5/8 inch diameter for 3 inch to 6 inch lines.

SRCS-R Cutter Set for 5/8” and 3/4” cables
SHD Spear Head
2UC 2” U-Cutter
3HDSC 3” Heavy Duty Side Cutter
3HDB 3” Heavy Duty Saw Blade
RTR-2 Large Retrieving Tool
Instructional Video included.  

PART #	Cable Included	SRCS Cutter Set*	Weight
P-S92-C	Basic Unit + 100EM5 (100 ft. x 3/4"), guide tube		242 lbs.
P-S92-E	Basic Unit + 100EM4 (100 ft. x 5/8"), guide tube		220 lbs.