Contact Tachometer Jumbo Digital Display CT6235B
CT6235B is a general-purpose instrument that uses dedicated fittings to measure—on contact—the speed of a motor or generator’s rotating shaft and the linear speed of a moving surface such as a conveyor belt or the circumference of a wheel.
The instrument also can be used as a ruler, to measure the dimensions of stationary objects.
Measurements are displayed in real time on a 1 in. high backlit liquid-crystal display and stored in memory.
Up to 96 measurements of rpm or linear speed can be stored, indexed and recalled, along with the last value, the minimum value and the maximum value of the series.
Thanks to its five-display, the tachometer can measure rotational speeds from 0 to 20,000 rpm, linear speeds from 5cm/min (2 in./min) to 2km/min (6,562 ft./min), and lengths from 5cm to 10km (2 in. to 6.2 miles).
Contact Tachometer Features:
5 digit LCD
Surface speed m/min.
0.2 to 6,560 RPM
Measurement ranges: Rotational speeds from 0 to 20,000 rpm; linear speeds from 50mm/min (2 in./min) to 2km/min (6,562 ft./min); Lengths from 50mm to 10km (2 in. to 6.2 miles)
Measurement accuracy: (0.05% of reading + 1 digit)
Measurement resolutions: 0.1 rpm for rpm measurements at and below 999 rpm, 1 rpm at higher speeds; 0.01m/min for linear speeds at and below 99.99 m/min, 0.1m/min at higher speeds; 0.02m for lengths over full measurement range
Storage capacity: 96 measurements
LCD size: 1.0625 in. (H) x 1.8725 in. (W) (27 x 47.6mm)
Operating temperature: 32° to 122°F (0° to 50°C) @ <80%RH
Weight: 9.9 oz. (280g)
Power source: Four "AA" batteries (included)
One Year Limited Manufacture's Warranty