Thermal Imaging Camera Plus Moisture/Temp/Humidity Meter - FLIR MR176

Flir MR176 Thermal Imaging Camera and Moisture Testing - ALL IN ONE!

Take Your Thermal Imaging to the Next Level by Adding These Features:

Moisture Readings With Pin or Pinless Mode, 

Temperature, Humidity, Dew Point, Vapor Pressure and Mixing Ratio

Customize Your Thermal Camera Measurements

Customize readings to your preference by selecting which measurements are integrated into your thermal images (moisture, temperature, RH, dew point, vapor pressure, mixing ratio), and display images in a color palette of your choice: Ice, iron, rainbow, or gray.

Use Pin or Pinless in Moisture Meter Mode

Verify moisture levels with non-intrusive, integrated pinless sensor moisture measurements, or via the external pin probe (with expandable probe options) for intrusive measurements.

Replaceable Thermal Hygrometer Probe

The field-replaceable temperature and relative humidity sensor can simply be removed from meter and replaced when needed, so you can reduce unnecessary downtime.

A Progressive Environmental Stability Indicator removes response-time error when you move through a site to different measurement locations, informing you when the relative humidity readings have stabilized.

Advanced Thermal Camera Features

IGM (Infrared Guided Measurement)

An 80 x 60, 4800-pixel Lepton®thermal imager powers IGM technology, visually indicating potential moisture areas via the color display

Measurement Accuracy

Progressive Environmental Stability Indicator removes response time error when you move through a site to different measurement locations, informing you when the relative humidity readings have reached a steady state.

Laser

Equipped with a laser and cross hair to easily reference the exact location of the potential moisture issue seen in the thermal image

FLIR MR176 Thermal Imaging Camera and Moisture Meter Specifications:

Thermal Imaging

Thermal Imaging Detector: FLIR Lepton microbolometer
Image Calibration: Automatic with manual lock scale option
Thermal Image Resolution: 4800 pixels (80 × 60)
Spectral Response: 8–14 μm
Field of View: 51° × 38°
Sensitivity: < 150mK
Detection Limit (Wet Area Detection @ 32ft (10m): 19.7in (49cm)
Image Frame Rate: 9 Hz
Thermal Image Palettes: Iron, Rainbow, Ice, Greyscale
Minimum Focus Distance: 10 cm (4”)

Moisture Measurement (Range / Basic Accuracy)

Pin Moisture: 7% to 30% / ±1.5% MC 30% to 100% Reference only
Pin Moisture Groups: 9 material groups
Pinless Measurement Depth: 0.75" (19mm) Max
Measurement Resolution: 0.1

Environmental Measurement (Range / Basic Accuracy)

Relative Humidity: 0 to 100% / 2.5%RH
Air Temperature: 32 to 122°F (0 to 50°C) / ±1.1°F (±0.6°C)
Dew Point: -22 to 122°F (-30 to 50°C) / ±1.8°F (±1.0°C)
Vapor Pressure: 0.0 to 12.0kPa
Mixing Ratio: 0 to 560GPP (0.0 to 80.0 g/kg) / ±2GPP (0.25 g/kg)

General Information

Display Type: QVGA (320 × 240 pixel) 2.3” color TFT graphical display
Saved Image File format: BMP with measurement values overlaid
Stored Image Capacity: 9999 images
Laser Orientation: Single laser pointer to center of thermal image
Continuous Run Time: 18 hours max
Typical Usage: 4 work weeks
Battery: 3.7V, 3000mAh Li-ion rechargeable via micro USB
Certification Standards: EN 61326 (EMC), EN 60825-1 Class 2 (Laser)
Agency Approvals: CE, FCC Class B

Manufacture's Warranty: 2 Years Product, 10 Years Thermal Detector

MR176 DATA SHEET