water dye tablets
Zoom image

Trace A Leak Septic Dye Test Tablets


Trace A Leak Septic Dye Water Test Tablets for Water Dye Test

Buy more for less:
1-9 items $15.24 / each  
10 or more items $14.24 / each save 7%
    • 24% less
    Market price: $19.99, you save $4.75
  • $15.24
Add a different product to compare

Trace A Leak Septic Dye Test Tablets -

Use Water Test Dye for Testing Septic Systems and Flow Studies

Quantity Discount - Buy 10 or More Bottles At $14.24 Each

Trace A Leak Septic Dye Test Tablets are highly potent septic leak dye tablets for use in tracing water, sewage, or septic systems. The dyes are safe, non-toxic, and biodegradable.

Click Here To See All of Our Septic Dye Test Products

The Trace A Leak Septic Dye Test Tablets are available in brilliant yellow green, red, or blue.

The fluorescent green and red can be detected with an ultraviolet light or by a fluorometer; the blue does not have these characteristics.

Place one or two water leak detection dye tablets in closet bowl or sink.  Run water through the plumbing system. 
Tablets will dye water and allow you to view leaks in the plumbing system or determine if the septic field is saturated by probing the area.

Easy to Use
Tablets dissolve quickly - 1 to 3 minutes.

Dilution rate: one tablet per 60 gallons of water equals 1 ppm concentration in clear water.
Contains 100 tablets per bottle.
PLEASE SPECIFY COLOR ABOVE: (Yellow-Green, Red, or Blue)

(Discounted price will appear in shopping cart when quantity is entered)
Click Here  For Material Safety Data Sheet (MSDS) - Yellow Green Fluorescent Tablets

Click Here  For Material Safety Data Sheet (MSDS) - Red Dye Tablets

Click Here
  For Material Safety Data Sheet (MSDS) - Blue Dye Tablets
    • Weight
      0.55 lbs
    • SKU
  • Manufacturer
    Presto Dyechem
  • Select Color
    Yellow-Green, Blue, Red

Product questions

  • Jeff Twehus
    05/24/2021, 04:51 PM

    Is leak trace blue dye tablets safe to use in a pond with fish and where cattle drink ?

    05/25/2021, 08:39 AM

    Please refer to the MSDS on the webpage for safety information.

  • Ryean
    04/16/2021, 02:31 PM

    How many tablets do you place in the toilet to test the side sewer?

    04/16/2021, 03:21 PM

    Typically you want to use 6 or 7 just to make sure you have enough. Make sure to mix them up.

  • Kimberly A Powell
    01/25/2021, 10:13 AM

    Our kitchen and two bathrooms butt up to the same wall and we always notice water on the floor in the kitchen and a hallway. There is no water in the cabinet below the kitchen sink so its coming under the cabinet area. Can we put these in a bucket of water and pour down the drain to see which drain the leak is coming from? I'd put a different color in each room to determine where leak was coming from...if we can how much of a tablet would we use? The flooring is vinyl so hopefully it would not permanently die it??

    01/25/2021, 10:59 AM

    The dye does not stain. That sounds like a viable way to see where your probably may be. You won't need many tablets for the water you are pouring. Maybe 2 or 3. You have to mix them in so you may want to do them 1 at a time into the bucket of water until you get the desired color strength.

  • Dick E
    08/14/2020, 02:04 PM

    How many tablets to test for a leak in a 1000 gal septic system?

    08/14/2020, 02:11 PM

    1 tablet per 60 gallons of water equals 1 ppm concentration in clear water. 17 tablets would give you roughly 1 ppm but there is no exact science to testing so as many as necessary to see the color.

  • Barb Tracy
    07/21/2020, 01:42 PM

    I have a leak in my pind dam, I would like to use dye to find the section of the dam that the leak is coming from so I can seal that area. Will this work? Thank you

    07/21/2020, 02:07 PM

    What I would do is mix the tablets in a 5 gallon bucket and slowly pour it in where you think the leak may be and watch for where the color goes.