Previous image
Drain Rooter PH
Next image
Zoom image

Drain-Rooter PH Drain Cleaner


Clear clogged sinks, tubs and laundry drains with less effort. Equipped with a variable speed power cable feed and variable speed motor, the Drain-Rooter PH cleans drains better and easier. 

  • $855.00
Add a different product to compare

General Wire Drain-Rooter PH Drain Cleaner

The Drain-Rooter PH feeds and retrieves the cable at up to 16 feet per minute. A four-foot guide hose eliminates cable whipping, dirty fixtures and messy floors. And the drum speed can be varied by changing the pressure on the foot pedal, making it easier to thread the boring head through sink strainers or crossbars.The Drain-Rooter PH is a real labor-saver on long jobs or when working in a cramped area where the weight of the machine could get burdensome.

Power Cable Feed

The power cable feed is real labor saver. It enables you to vary feeding speed in and out of the line and gives you better control when working tough stoppages.

Foot Pedal

The drum speed can be varied by changing pressure on the foot pedal. 

Cartridge Refill System

To switch to a different diameter cable, you just loosen three screws, pull the front of the drum off the cable, and load another cartridge. Changing takes less than a minute and turns what could be a messy job into a clean one. The tough plastic cartridges are so inexpensive, you’ll probably want to store all of your cables in them. 

Flexicore® Cable

Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It’s so tough, it has a one year warranty against defect or breakage.

 Drain-Rooter PH Features: 

  • Clears clogged sinks, tubs, and laundry drains in 1-1/4” to 3” lines.
  • Variable speed power cable feed drives and retrieves cable at up to 16 ft. per minute.
  • Four-foot guide tube keeps hands and job site clean.
  • Pneumatic foot pedal controls motor speed.
  • Band-It™ splashguard minimizes excess water spray from the spinning drum.
  • Quick-change cartridge makes switching cables clean and easy.
  • Holds 50 ft. of 1/4″ or 5/16″, or 35 ft. of 3/8″ Flexicore cable.
  • Flexicore wire rope center cables have unequaled strength yet the right amount of flexibility.
  • Made in U.S.A.

Unit Options:

PART #What's Includedw/HECS Cutter Set*Weight
PH-DR-BBasic Unit + 50HE1-AC (50 ft. x 5/16")
40 lbs
PH-DR-DBasic Unit + 50HE1 (50 ft. x 1/4")None37 lbs

Drain-Rooter PH Specifications:

Weight: Weight: 22 lbs.  (without cable)

Dimensions: 22” deep x 13-1/2” wide x 15” high (without hose) 

Drum: Heavy gauge stamped aluminum with inner drum to prevent cable tangling.

Capacity: 50 ft. of 1/4″ or 5/16″ cable; 35 ft. of 3/8″ cable.
All cables are left hand wound and reinforced with a wire rope center.

Power Cable Feed: Drives 1/4″, 5/16″ and 3/8″ cables.

Cutter Set: Arrow Head, Boring Gimlet, Down Head Boring Gimlet, 1-1/4″ Side Cutter Blade,
Flexible Arrow Head Cutter

Motor: All ball-bearing, double insulated, reversible motor with speed control;
0-400 rpm, 230 and 240 volts available.

Foot Pedal: Pneumatic foot pedal controls variable speed motor. Leaves operator’s hands free to control cable.

Click Here for Operating Instructions

    • Weight
      42 lbs
    • SKU
  • Select Unit
    Machine + 20ft x 5/16in cable + HECS Cutter Set, Machine + 50ft x 1/4in cable

Product questions

No questions yet. Be the first to ask the question!
Related products