|
|
|
WartHog WV Classic Sewer Jetter Nozzle WartHog - 1/4"
The WartHog Sewer Jetter Nozzle WV-1/4 uses StoneAge sewer jetter nozzle flow-through technology and revolutionary high-speed rotating design with no high pressure seals or bearings to service. Free Shipping In The Continental U.S.
Sewer Jetter Nozzle - Warthog AMWV-1/4
Three Powerful Jets Cut Roots, Clear Grease, & Remove Scale
- Excellent for navigating multiple elbows.
- No high-pressure seals or bearings to maintain
- Easily replaceable heads
Free Shipping In The Continental U.S.
The WV-1/4 uses StoneAge's flow-through technology and features a revolutionary high-speed rotatating design with no high pressure seals or bearings to service. It cleans lines as small as 2" with long sweeping elbows. The head design also features permanent, pre-drilled orifices, rather than threaded nozzles.
The tool operates from 2-5k psi and 3-8 gpm. It has a 1/4" NPT pipe thread inlet and if a 1/4" NPT hose fitting is used the tool can pass through long radius elbows in 2" and larger lines. There are no maintenance or overhaul kits due to the low-maintenance design.
- For 2" - 4" Lines with Elbows.
- For cart and trailer jetters.
- For small lines with light to moderate blockages.
- 4 tool head options to choose from.
Warthog WV-1/4 Jetter Nozzle Specifications:
Maximum Pressure: 5k psi
Operating Pressure: 2-5k psi
Flow: 3-8 gpm
Flow Rating: 0.8 Cv
Pulling Force: 4-9 lb
Inlet Connection: 1/4 NPT or BSPP
Tool Diameter: 1.3 in.
Length: 2.0 in.
Nozzle Ports: 3 Drilled
Weight Complete: 0.45 lb
| Model | Front Jet | Back Jets | Flow |
| # WV-1/4-A | 0.024 in. | 2 x .052 in. | 7 - 8 gpm |
| # WV-1/4-B | 0.020 in. | 2 x .039 in. | 5 - 6 gpm |
| # WV-1/4-C | 0.018 in. | 2 x .032 in. | 4 - 4.5 gpm |
| # WV-1/4-D | 0.018 in. | 2 x .028 in. | 3 - 3.5 gpm |
-
ManufacturerAmazing Machinery
-
Product Weight.45 lbs.
-
Select Model:WV-1/4-A - 7-8gpm, WV-1/4-B - 5-6gpm, WV-1/4-C - 4-4.5gpm, WV-1/4-D - 3-3.5gpm
-
Maximum Pressure:5k psi
-
Flow:3-8 gpm
-
Flow Rating:0.8 Cv
-
Pulling Force4-9 lb
-
Inlet Connection1/4 NPT or BSPP
-
Tool Diameter:1.3 in.
-
Length:2.0 in.
-
Nozzle Ports3 Drilled
Product questions
-
06/02/2024, 07:17 PM
I recently asked if a 3200 psi 2.5 gpm would still work but I made a mistake, it's a gas pressure washer 3600 psi 2.5 gpm. I'm assuming that it won't work 100% but it will still work?
06/03/2024, 09:50 AMYes that is still the case but it will work better than we previously thought.
-
05/31/2024, 09:40 AM
will this nozzle still work well with a flow rate of 2.5 gpm @3200 psi?
05/31/2024, 10:12 AMYou are on the light end. Your orifice size is 2.8 so you are limited to the pro nozzles because they are custom drilled per your specs. Suttner, Warthog, and Reaper nozzles won't go down to your orifice size. Most of the pro nozzles are listed on this page: https://www.toolexperts.com/sewer-jetter-nozzles-and-hoses/
Feel free to give us a call at 865-882-3833 if you have more questions.
